Metal 3D printing from your model
Parts in stainless steel, aluminium, titanium, copper and Inconel – from a single prototype to a small batch, with electropolishing for a smooth, clean finish.
What we offer
When metal 3D printing pays off
- When the part has a complex shape, internal channels or a lightweight structure that is costly or impossible to machine.
- When you need a few pieces fast, without making a mould.
- When you want to replace an assembly of several parts with a single part.
Build area: up to 280 × 280 × 350 mm as standard and up to 420 × 420 × 450 mm for large parts.
Materials
| Grade | Material | Tensile strength (MPa) | Typical use |
|---|---|---|---|
| 316L | Stainless steel | ≥ 560 | Corrosion-resistant parts |
| 17-4PH | Stainless steel | ≥ 1100 | High-strength stainless parts |
| 1.2709 (MS1) | Tool steel | ≥ 1090 | Moulds with conformal cooling |
| AlSi10Mg | Aluminium alloy | ≥ 330 | Light housings, heat exchangers |
| 6061 | Aluminium alloy | ≥ 280 | Light structural parts |
| Ti6Al4V | Titanium alloy | ≥ 600 | Light, strong parts |
| CuCrZr | Copper alloy | ≥ 300 | Electrodes, inductors, cooling |
| Inconel 718 | Nickel superalloy | ≥ 980 | High temperatures |
Gallery
Electropolishing a printed part
Examples of parts made with SLM technology
Illustrative examples of what selective laser melting (SLM) makes possible – complex geometries, internal channels, lattice structures and various post-processing options.
